Troubleshooting - JVC XV-S500BK Instruction Manual

Troubleshooting

What appears to be a malfunction may not always be serious. Please go through the following list before requesting service.
POWER
Symptom
Power does not come on.
OPERATION
Symptom
The remote control unit does not work.
The TV/VIDEO - CANCEL, 5/∞/2/3 or
numeric buttons do not work.
Operation is not possible.
When using the TITLE/GROUP button to
select a title during DVD VIDEO playback,
appears on the TV screen and the title
cannot be selected.
Possible cause
Power plug is not inserted securely.
Possible cause
Too far from the unit.
The tip of the remote control unit is not
pointed in the right direction.
Batteries are exhausted.
Battery polarity is incorrect.
The remote control unit is not set for
operating your TV.
The TV - DVD switch is not correctly set.
Microcomputer malfunction due to
lightning or static electricity.
Moisture condensation caused by a sudden
change of temperature or humidity.
The disc does not allow the operation.
Or a non-playable disc is loaded.
The disc does not allow the operation
because of disc contents.
Additional information
Remedy
Plug in securely.
Remedy
More closer to the unit.
Point the infrared light- emitting window
toward the remote sensor on the front
panel. (See page 10.)
Replace the batteries with new ones.
Take out the batteries and insert them again
in the correct direction.
Set the remote control unit for operating
your TV. (See page 12.)
To control the unit, set the TV - DVD switch
" "
to
DVD . To control your TV, set the TV -
" "
DVD switch to TV . (See page 11.)
Turn off the power and unplug the power
cord, then connect the power cord again.
Turn off the power, then turn it on a few
hours later.
Check and replace the disc. (See page 4.)
Try to press 7 and select a title using the
numeric buttons on the remote control
English
59