13.2 Remote Control Button
13.2.1
SET Button
•
To check remote control transmission code and store the transmission code to EEPROM
Press "Set" button for more than 10 seconds by using pointer
o
Press "Timer Set" button unit a "beep" sound is heard as confirmation of transmission code change.
o
13.2.2
RESET (RC) Button
•
To clear and restore the remote control setting to factory default.
Press once to clear the memory
o
13.2.3
TIMER ▲
•
To change indoor unit indicators' intensity:
Press continuously for 5 seconds.
o
13.2.4
TIMER ▼
•
To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F)
Press continuously for 10 seconds.
o
60