2
Turning Power On and Off
Press
on the front panel or remote control to turn the DCX set-top on or off
POWER
(standby). When using the remote control, be sure it is in cable mode by pressing
before pressing
buttons are touch-sensitive, so simply touch the
Note: On initial power-up of the DCX set-top please wait for at least 2
seconds before touching the front panel controls.
Changing Channels
You can change channels in three ways:
•
Press
CHANNEL +
step through the channel selection.
•
Enter the number of the channel you wish to view using the number keys on the
remote control.
•
Select the channel in the Interactive Program Guide.
Adjusting the Volume
Press
VOLUME +
volume, the volume scale is displayed on the screen. Press
to toggle the sound on and off.
For best audio quality when using the analog L/R (variable ) volume controlled audio
outputs, use the remote control to set the DCX set-top to approximately three quarters
of the maximum volume level and then adjust the audio levels on external devices such
as your TV or A/V receiver.
When using the analog L/R (fixed) audio outputs or any of the digital audio outputs
(HDMI, IEEE-1394, optical or coaxial digital audio) adjust the audio levels on your external
device such as your TV or A/V receiver. You may also be able to program your remote to
control the volume of your TV or A/V receiver directly (refer to the remote control
instruction manual).
2 • Operation
. When using the front panel please note that the front panel
POWER
or
on the front panel of the DCX set-top or the remote control to
–
or
on the remote control to adjust the volume. When you adjust the
–
Operation
button to turn on the set-top.
POWER
on the remote control
MUTE
B
CABLE
5