Control Unit (Rear) - Yamaha disklavier tv User Manual

■ Control Unit (Rear)

1
USB TO DEVICE port
1
Used to connect a USB flash memory,
an optional USB floppy disk drive, etc.
LAN port
2
Used to connect to the Internet.
OUTPUT jacks
3
Used to connect speaker cables to
monitor speakers*
ANALOG MIDI IN jacks
4
Used to connect audio equipment such
as an external CD changer.
OMNI (SYNC) OUT jacks
5
Used to connect the microphone/line
input of a camcorder.
OMNI (SYNC) IN jacks
6
Used to connect the audio output of a
camcorder or computer.
2 3
7 8 9
4 5 6
10 11
TO PIANO connectors
7
Used to connect the piano.
DC-IN 12V connector
8
Used to connect to the power supply
unit.
USB TO HOST port
9
Used to connect the USB cable from a
computer.
MIDI OUT terminal
10
Used to connect external MIDI
equipment for outputting MIDI data.
MIDI IN terminal
11
Used to connect external MIDI
equipment for inputting MIDI data.
* Only for models supplied with monitor speakers.
DisklavierTV User's Guide (For Disklavier E3 and DKC-850 Users)
Introduction
5