10.2.4
Connect the Cable to the Indoor Unit
1
The inside and outside connection cable can be connected without removing the front grille.
2
Connection cable between indoor unit and outdoor unit shall be approved polychloroprene sheathed 4 x
2
1.5 mm
(1.0 ~ 1.5HP) or 4 x 2.5 mm
cord. Do not use joint connection cable. Replace the wire if the existing wire (from concealed wiring, or
otherwise) is too short.
Secure the connection cable onto the control board with the holder.
o
2
(2.0 ~ 2.5HP) flexible cord, type designation 245 IEC 57 or heavier
42