Front Wheel Bearing Removal; Front Wheel Bearing Reassembly; Front Wheel Installation - Suzuki RM85 Owner's Service Manual

14-4 FRONT AND REAR WHEELS

FRONT WHEEL BEARING REMOVAL

• Fit the bearing remover into the wheel bearing.
 09921-20220: Bearing remover set
• Remove the bearings and spacer.

FRONT WHEEL BEARING REASSEMBLY

• Apply grease to the bearings.
• Reassemble the spacer and bearings with the special tool.
 09941-34513: Bearing installer set
NOTE:
* The sealed cover of the bearing must face outside.
* Reassemble the left side (disc side) bearing first and then
reassemble the right side bearing.
* After reassembling the bearings, inspect the bearings for
smooth movement.

FRONT WHEEL INSTALLATION

• Install the front wheel, axle collars and front axle.
• Tighten the axle nut to the specified torque.
 Axle nut: 44 N·m (4.4 kgf-m, 32.0 lb-ft)
• Replace the cotterpin with a new one.
Left
Clearance
Left
Right
Right