Advertisement
- Pressing and holding the
- Simultaneously, the entered number will be appeared on the touch screen.
- If a number is wrongly input, press the
icon "
" on the touch screen to delete the incorrect number.
4.2.2 Press the "
5. Caller ID
When a ring comes, the caller's numbers will be shown on the touch screen, you can
decide whether or not to answer, so you avoid unnecessary trouble and disturb.
6. Accepting an incoming call
If the automatic call accept function is not activated,when a ring comes, press the "
button on the head unit or remote control to switch on the calling.
7. Rejecting an incoming call
When a ring comes, press the "
coming call.
8. Terminating a call
During a phone call, press the "
the current call.
9. Call back
When you missed a coming call, or you terminated an incoming call just now, click the
icon "RECALL" on the touch screen to call back.
10. Call Transfer
During a phone call, you can transfer the call to your mobile phone or the hands-free
system by pressing the "
the touch screen.
11. A2DP Function
If your mobile phone support
is special designed for transmitting stereo music to bluetooth device.
You can transmit the audio data(music) from a mobile phone to the DVD tuner via this
blutetooth device. You can listen to the music stored in your mobile phone by the
bluetooth hands-free system.
- Make sure that your mobile phone and this DVD tuner were connected via pairing.
Touch the icon "
A2DP
will pop up the following interface:
: Pause/play
: Previous Track
9 :
The
,
/
and
available in A2DP playback status.
Touch the
SRC
(Source) button on front panel or press the
control to switch to other mode.
12. Phone Book
At connect status, touch the icon "
screen, or press and hold the
remote control to enter phone book interface.
The structure of the blue tooth menu as follows:
+
button on the remote control when you want to input " + ".
" button on the remote control to dial.
" button on the head unit or remote control to reject the
" button on the head unit or remote control to hang up
" button on the remote control or touching the icon "
A2DP
function ( Advance Audio Distribution Profile) that it
" on the touch screen to active audio transmission.The touch screen
: Stop
: Next Track
button
on the remote control
Pbook
BT MENU
DEL
button on the remote control or touch the
are
" on the touch
button on the
MODE
button on the remote
User's Manual page 26
"
" on
Switch
-
Advertisement
