Advertisement
Radio operations
Listening to the radio
1. Touch the
SRC
"
" on the
main menu
2. Press the
BAND
repeatedly to select the radio band in the following
sequence:
FM1--FM2--FM3--AM1--AM2
Press and hold the
(Europe frequency) and USA2 (USA frequency).
3. Press the [
/
Tuning
There are 3 types of tuning mode available, seek tuning, manual tuning and preset
tuning.
Seek tuning
1. Press the
BAND
2. Press the
/
touch screen to tune in a station automatically.
frequency. Press the
Manual tuning
1. Press the
BAND
2. Press the
/
Auto store
You can store up to 30 stations on the FM/AM band (6 stations per band) in the unit's
memory. The auto store function allows you to automatically store 6 stations for the
chosen band. If 6 stations with good reception cannot be received, the previous stored
stations (if they exist) remain as they are.
1. Press the
BAND
2. Hold down the
AS/PS
are stored automatically.
3. Press the
AS/PS
stop the preset scan.
Manual store
In radio mode, press the
have found the station of your choice, hold down a button from 1 to 6 to store.
Recalling a preset station
Select a frequency band and use the number buttons (1 to 6) to recall a preset station.
Press the
or
touch screen can also select a preset station.
Stereo/Mono
Press the
MO/ST
button on the remote control to select FM stereo or mono reception. If
signal reception is weak and distortion occurs, you should switch to mono reception.
Local/Distant
Press the
LO/DX
button on the remote control to select local or distant stations.
-
1
User's Manual page 5
(SOURCE) button o
to select the radio mode.
button on the remote control
BAND
button on the remote control to switch between EUR01
] buttons on the remote control to tune in a station automatically.
button to select the desired band.
button on the remote control or touch the
/
button to reduce the frequency.
button to select the desired band.
button on the remote control to manual tuning.
button to select the desired band (FM1-FM2-FM3-AM1-AM2).
button for 2 seconds or longer. The stations with good reception
button to scan each preset station for 5 seconds and press it again to
/
buttons on the remote control to scan stations. When you
button on the remote control or touch the preset staion (1 to 6) on the
r touch the icon
Press the
or
button on the
/
button to increase the
Advertisement
