INTRODUCTION ................................................................ 4
FEATURES ........................................................................... 4
Description .............................................................................. 6
STATUS LEDS ................................................................... 7
Sequence ..................................................................................... 8
SMS function .......................................................................... 8
ContactID Mode ..................................................................... 8
Function Priority ...................................................................... 9
Telephone Page ..................................................................... 11
Telephone Numbers ................................................................... 11
Prefix ........................................................................................... 11
Digit to Remove ........................................................................... 11
SMS Dialer Page .................................................................. 11
Main window ............................................................................... 11
Priority ........................................................................................ 12
Therefore, the connection of a charged battery to this Device is mandatory for its proper operation.
The current limiter can be bypassed by moving the jumper JP3 (part n. 8 of the Identification of the Parts)
downward (when jumper JP3 is found upward - factory setting - the current limiter is active),
in this way all the current requested from this Device (700 mA Max.) will be supplied by panel aux. power output,
If the limiter is bypassed and the panel is not able to supply the necessary current for the proper operation of this Device,
The BACK-UP BATTERY MUST ALWAYS BE CONNECTED TO the DEVICE,
TABLE OF CONTENTS
In order to avoid the overload of the panel aux. power output
this Device is equipped with a limiter for the drawn supply current.
This current limiter fixes to 120 mA the maximum current drawn by the Device
and the current peaks will be supplied by the back-up battery.
therefore, it must be properly determined the max output power of panel.
The current limiter MUST BE BYPASSED if it is previewed that this Device
transmits for long periods of time on GSM/GPRS network.
Otherwise the battery back-up could be disharged excessively
and may not ensure the correct transmission of alarms.
use a 13.8 V_ , ±2%, 1 A, external power supply.
in any case of the current limiter is ON or OFF.
Periodic message ...................................................................... 12
Outputs Page ........................................................................ 12
Output Settings .......................................................................... 12
Access Code .............................................................................. 12
Contact ID Page ................................................................... 13
Events description ..................................................................... 13
Contact ID default ...................................................................... 13
Send over GPRS ........................................................................ 13
Periodic Reports ........................................................................ 13
GPRS page .......................................................................... 14
DNIS ........................................................................................... 14
Account code ............................................................................. 14
Calls Page ........................................................................... 14
Load button ............................................................................... 14
Received Calls .......................................................................... 14
Missed Calls ............................................................................... 14
Dialled Calls .............................................................................. 14
Status Page .......................................................................... 15
Status section ............................................................................. 15
Inputs section ............................................................................. 15
Outputs section .......................................................................... 15
Events section ............................................................................ 15
Clear call queue ........................................................................ 15
ATTENTION
G
3