Remote Control (Optional - Panasonic Digital Palmcorder PalmSight PV-DV200-K Operating Instructions Manual

Camera Recording / Remote Control
Blank Search
You can go directly to a blank portion of
tape and start recording exactly where you
left off.
MENU Button
Remote Control (Optional, page 71)
You can operate the major functions of your Palmcorder from up to approximately 16 feet
(5 m) away (indoors). Aim the IR Remote Control toward the front of the Palmcorder and
press the desired buttons (Remote Sensor is located under the lens).
To operate Camera functions:
Set POWER to CAMERA.
To operate VCR functions:
Set POWER to VCR.
Remote Sensor
200_400-K.30-39.p65
JOG KEY
POWER Switch
Controlled Functions
Rec/Pause (page 30)
Tele (Zoom) (page 51)
Wide (Zoom) (page 51)
Date/Time (page 27)
Reset (page 60)
PhotoShot (page 52)
Display On TV (page 40)
Counter/Time Code (page 26)
Audio Dubbing (page 59)
Record (page 62)
Menu (page 20)
Play (page 35)
FF/Search (page 36)
REW/Search (page 36)
Pause/Select (pages 20, 36)
Stop/Set (pages 20, 35)
Slow/Frame Advance (Forward) (pages 36, 38)
Slow/Frame Advance (Backward) (pages 36, 38)
Index Search (Forward) (page 39)
Index Search (Backward) (page 39)
Speaker Volume (page 35)
33
1
Set the POWER to VCR.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
VCR position.
2
Press MENU to display the VCR
mode menu screen.
3
Rotate JOG KEY to select
MODE , then press JOG KEY to
display the VCR PLAY MODE menu
screen.
4
Rotate JOG KEY to select
in the VCR PLAY MODE menu (page
25).
5
Press JOG KEY to select ON.
• "BLANK" will appear on the screen.
R 0 : 1 2
J A N
00/06/14, 13:11
PLAY
B.SEARCH
L P 0 h 1 0 m 1 5 s 2 5 f B L A N K
2
2 0 0 0
33