Panasonic Viera TC-L42E30H Operating Instructions Manual page 13

Setup the wireless LAN connection
Setup the wireless LAN connection to enable the network service functions.
•
To setup the wireless LAN connection, the wireless LAN Adaptor is required.
•
Confirm the encryption key, settings and positions of your access point before starting setup.
For details, read the manual of the access point.
•
Please note that this TV does not support wireless public access points.
Connect the Wireless LAN Adaptor to the USB 1 or 2 port
1
Internet environment
Access point
Select [Yes]
2
Start wireless LAN connection setup?
Yes No
Please connect the wireless LAN adaptor to a USB terminal.
Select the connection type
3
Connection Type
Please select network connection type.
WPS(Push button)
Search for access point
■
[WPS(Push button)]
WPS(Push button)
1) Please press the 'WPS' button on the access
1) Please press the 'WPS' button on the access
point until its light flashes.
point until its light flashes.
2) When the light is flashing select 'Connect' on
2) When the light is flashing select 'Connect' on TV.
TV.
If you are unsure, please check the instruction
If you are unsure, please check the instruction
manual of the access point.
manual of the access point.
Connect
■
[Search for access point]
Access points found automatically are listed.
Available Access Points
No. SSID Wireless type Encrypt
1 Access Point A 11n(2.4GHz)
2 Access Point B 11n(5GHz)
3 Access Point C 11n(5GHz)
Encryption Key Setting
Connection will be made with the following settings:-
SSID : Access Point A
Authentication type : WPA-PSK
Encryption type : TKIP
Please input the encryption key.
Encryption key
Access Point Settings
Encryption key
A B C D E F G H I J K L M N
U V W X Y Z 0 1 2 3 4 5 6
a b c d e f g h i j k l m n
u v w x y z ( ) + - . * _
Access Point Settings
Encryption key is set to:-
XXXXXXXX
Select 'Yes' to confirm.
Select 'No' to change.
Yes
Wireless LAN connection setup is completed
•
If failed, check the encryption key, settings or positions of your access point.
Read the manual of the access point.
•
If connection to the access point is successful, we recommend you perform the [Connection
Test] (p. 50).
Wireless LAN Adaptor
select
confirm
select
confirm
Press the WPS button on the access point until the light flashes.
And then, press the OK button to connect the Wireless LAN
Adaptor and the access point.
•
Ensure that your access point supports WPS for this method.
•
WPS: Wi-Fi Protected Setup™
1
Select your desired access point
Reception
select
access
2
Access the encryption key input mode
•
If the selected access point is not encrypted, the confirmation
screen will be displayed. It is recommended to select the
encrypted access point.
3
Enter the encryption key of the access point
(Set characters one by one)
O P Q R S T
select
7 8 9 ! : #
o p q r s t
set
•
You can set characters by using numeric buttons.
4
Select [Yes]
select
set
•
To re-enter the encryption key, select [No].
No
•
If your access point supports WPS (Push
button), then select this option. If not,
select [Search for access point].
•
To search access points again
•
For the information of the
highlighted access point
RETURN
Store
Y
INFO
13