Selecting The System Language; Setting The Keyboard Language With The Application For Iphone; Setting The Beep Sound; Adjusting The Response Positions Of The Touch Panel (Touch Panel Calibration) - Pioneer AVH-4000NEX Owner's Manual

Selecting the system
language
The system language can be selected.
The language can be changed for the
following:
— The "Audio" screen
— The "System" screen
— The "Video Setup" screen
— The "Bluetooth" screen
— Language for messages
Some operations on this product are pro-
hibited from use while driving or require
careful attention when operated. In such
cases, a caution message will appear on
the display. You can change the language
for caution messages with this setting.
If the embedded language and the
selected language setting are not the
same, text information may not display
properly.
Some characters may not be displayed
properly.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "System" screen appears.
3 Touch [System Language].
The pop-up menu appears.
4 Touch the desired language.
After the language is selected, the previous
screen returns.
Setting the keyboard lan-
guage with the application
for iPhone
You can use the keyboard in AppRadio
Mode by setting the language of the key-
board for iPhone.
p This function is only available in
AppRadio Mode on the iPhone.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "System" screen appears.
3 Touch [Keyboard].
The "Keyboard" screen appears.
4 Touch the desired language.
After the language is selected, the previous
screen returns.

Setting the beep sound

1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "System" screen appears.
3 Touch [Beep Tone] repeatedly until
the desired setting appears.
On (default):
Sounds a beep.
Off:
Does not sound a beep.
Adjusting the response posi-
tions of the touch panel
(touch panel calibration)
If you feel that the touch panel keys on the
screen deviate from the actual positions that
respond to your touch, adjust the response
positions of the touch panel screen.
p This setting is available only when you
stop your vehicle in a safe place and apply
the parking brake.
p Do not use sharp pointed tools such as a
ballpoint or mechanical pen, which could
damage the screen.
p Do not turn off the engine while saving
the adjusted position data.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "System" screen appears.
3 Touch [Touch panel calibration].
The touch panel adjustment screen appears.
4 Touch two corners of the screen
along the arrows, and then touch
the centers of two + marks at the
same time twice.
5 Press the HOME button.
The adjustment results are saved.
6 Press the HOME button once again.
Proceed to 16-point adjustment.
If you press and hold the HOME button,
the adjustment is canceled.
7 Gently touch the center of the +
mark displayed on the screen.
The target indicates the order.
After you touch all marks, the adjusted posi-
tion data is saved.
If you press the HOME button, the previ-
ous adjustment position returns.
If you press and hold the HOME button,
the adjustment is canceled.
8 Press and hold the HOME button.
The adjustment results are saved.

Adjusting the picture

You can adjust the picture for each source
and rear view camera.
CAUTION
For safety reasons, you cannot use some
of these functions while your vehicle is in
motion. To enable these functions, you must
stop in a safe place and apply the parking
brake. Refer to Important Information for the
User (a separate manual).
1 Display the screen you wish to
adjust.
2 Press the HOME button to display
the Top menu screen.
3 Touch the following keys in the
following order.
The "System" screen appears.
4 Touch [Picture Adjustment].
5 Touch any of the following keys to
select the function to be adjusted.
Picture adjustment items are displayed.
Brightness:
Adjusts the black intensity.
Contrast:
Adjusts the contrast.
Color:
Adjusts the color saturation.
Hue:
Adjusts the tone of color (which color is
emphasized, red or green).
Dimmer:
Adjusts the brightness of the display.
Temperature:
Adjusts the color temperature, resulting
in a better white balance.
p You can adjust Hue only when the color
system is set to NTSC.
If you touch [Rear View], the mode
changes to the selected camera mode. By
touching [Source], [Navi] or [Apps], you
can return to the selected mode.
6 Touch the following keys to adjust
the selected item.
Decreases the level of the
selected item.
Increases the level of the
selected item.
Selects the adjustable previous
item.
Chapter
22
51
En