Table of Contents
Advertisement
Connecting to an Amplifier or Receiver
By connecting the output from the player to speakers via a receiver or receiver you can enjoy realistic sound.
Amplifier or Receiver
After you have setup the connection...
Downmix Settings
When playing DVD Audio, Dolby Digital, and DTS multi-channel discs the downmix settings are used. These settings
mean that even when multi-channel discs are played back in two stereo channels, they use not only the front left
and right channels, but also use the other channel information. Set [DOWNMIX] in Initial Settings 2 of the Initial
Settings screen to [Lt/Rt] or [Lo/Ro]. See page 29.
• If [DOWNMIX] is set to [OFF], you can hear only front left and right channel sound.
• Some multi-channel DVD Audio discs prohibit downmixing. In these cases sound will only be output of the front
left and right channels.
To LEFT input terminal
To RIGHT input terminal
RIGHT
REAR
RIGHT
WARNING: SHOCK HAZARD - DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR
Connect the player output to
the amplifier line input terminal
(AUX, DVD, CD, etc.) See
Audio cable
pages 9 and 10 for details for
the video signal connection.
Main unit
LEFT
CENTER SUBWOOFER
Apparatus Claims
U.S. Patent Nos.
LEFT
4,631,603, 4,577,2
4,819,098, and
4,907,093 licensed
FRONT
for limited viewing
uses only.
AUDIO ANALOG OUTPUT
Connections
11
Advertisement
Table of Contents
