Table of Contents
Advertisement
Part
616079 (86-09)
No.
D
Model
Model
B
875
36
(930
I
I
I
INSTRUCTIONS FOR INSTALLATION
Prepare the ponel
tration.
Use dimensions given for your porticulor
model.
The maximum ponel thickness must not
exceed 3/16" (4.76rnm).
A. Single Door Or Lower Door O f 2-Door
1.
Remove the door frovt decorative strip
removing the screws and pulling the decor-
ative strip off.
2.
Insert one of
(b) into the groove
3.
Gently flex the popel(b) so thot the oppo-
site side rnoy be
ponding groove.
4. Slide the ponel(b) downword so thot the
lower horizontal edge fits into the bottom
groove.
5.
the gop
ond door frome(c).
B.
Upper Door Of
1. Remove the door front decorative strip by
removing the screws and pulling the decor-
ative strip off.
2.
Insert one of the verticol sides of the
(b) Into
frorne outer flonge(c) and the door front.
3.
Gently flex the ponel(b) so thot the oppo-
site side rnoy be slipped into the corres-
ponding groove.
4.
Slide the panel(b) upword so thot the upper
5.
install the door decorotive strip(a) to cover
the gop
(b) ond door frome(c).
Caution:
Do
Not Over Tighten Screws
I
OF
IN
by
cutting to size as per illus-
by
the
ponel
formed
by the
front.
slipped into the corres-
between the top edge of ponel(b)
Secure with screws.
2-Door
pond
the groove
by the
door
between the bottom edge of ponel
Secure with screws.
A
Model
24 1/4 (616
878
1/16 (332 mm)I
C
Model
32 7/16 (824
878
(in)
a
Hide quick links:
Advertisement
Table of Contents
