Touch Controls - Automatic Reset; Touch Controls - Manual Rest; Residual Heat Indicator - Miele MasterChef KM342 Technical Manual

MasterChef Collection Cooktops
3.3.5 Touch Controls – Automatic Reset
The cooktop automatically resets:
after a power failure
in response to changing light conditions – see note below.
Note
Should the cooktop be installed in an environment that is brightly lit,
or completely shaded; the touch controls may not function properly.
3.3.6 Touch Controls – Manual Reset
Shut off power to the appliance (i.e. turn circuit breaker off).
1.
Wait at least one (1) minute.
2.
Restore the power to the appliance.
3.
3.3.7

Residual heat indicator

After the burners or the cooktop have been turned off, the residual
heat of the burners which may still be hot are indicated by an
the display.
The
Service Tip
If the power supplied to the appliance is interrupted (i.e. breaker
shut off, power outage...) the residual heat indicators will flash
when power is restored.
in the display goes out when the burners are safe to touch.
21
Technical Information
in