Advertisement
3-2 The module should pop up into a 45 degree angle. Remove the module by pulling it gently backward.
Use side-to-side motion, if necessary, to remove. Push down the memory module gently until the metal-
locking levers aside from the DIMM socket 1 is fastened.
!!! The location of the notch along the gold edge of the memory module needs to be lined up with
keyed notch in the socket. Memory module can only fit in one direction due to the keyed notch.
Wrong orientation will cause improper installation and may damage the memory modules or
DIMM sockets!!!
3-3 a.b.c If you have more than one memory module, please align the 2nd memory module to the DIMM
socket 2. Memory should be inserted firmly at a 45 degree angle and pushed down until module snaps
into place.
!!! Memory module can only fit in one direction due to the keyed notch. Wrong orientation will
cause improper installation and may damage the memory modules or DIMM sockets!!!
Advertisement
