DEC 4000 Model 200 Operation Manual page 115

1. Obtain a blank tape cartridge. Write the name on the paper label. For
example, you would use the name S/A BKUP V5.4–n TK50 to build a
Version 5.4–n kit. Insert the label into the label slot.
2. Write-enable the tape cartridge.
3. Insert the tape cartridge labeled S/A BKUP V5.4–n TK50 in the tape
cartridge drive.
4. Log in to the SYSTEM account.
5. Enter the following command:
$ @SYS$UPDATE:STABACKIT
6. The system asks for the name of the target device. Enter MUA0, for
example:
%STABACKIT-I-SYMDEL, all global symbols deleted
Enter the name of the device on which to build the kit:
MUA0
Return
NOTE: If your system uses the TLZ04 tape drive, enter the device name
MKA0. If your system uses the TF85 tape drive, enter the device name
MIA0.
7. The system displays the following message:
.
.
.
Please place the scratch tape cartridge in drive _MUA0:
This volume will receive the volume label SYSTEM.
Enter "YES" when ready:
8. When you are ready to continue, enter Y (for Yes) and press Return.
9. The system displays verification messages informing you that files are
being copied.
10. When standalone BACKUP is installed, the system displays a message
similar to the following:
Ending time 19-APR-1991 13:45:29.90
Starting time 19-APR-1991 13:22:39.05
The kit is complete.
$
11. Remove the tape cartridge labeled S/A BKUP V5.4–n TK50 from the
tape cartridge drive.
C–4 VAX 4000 Model 200 (BA430) Operation
Return