Table of Contents
Advertisement
Before Operation - VCP part
How to using the main menu
This VCP can easily be programmed by using the
menus displayed on screen.
The menus are controlled from the Remote
Control Handset.
1 1
Switch on your TV set and video player by pressing
1 .
1
2 2
Press VCP.
3 3
Press MENU.
The main menu will appear on the TV screen.
VCR
DR
OPR
F.OSD ON/OFF - To switch the display of opera-
O
tional mode of your VCP ON or
OFF (see p 24).
OPR - To improve the playback picture
O
(see p 18).
DR - To check a problem with your VCP
O
(see p 24).
ABC OSD - To change the language setting for
O
OSD.
You can select the language
between English and Russian.
KARAOKE - To switch on or off Karaoke &
O
Karaoke Search (see p 26).
SCORE - To display the score your song when
O
you Karaoke (see p 26).
SYSTEM - Select the colour system used for
O
playback and recording.
The system is changed as shown
below. (Refer to the right for more
information.)
* If you want to record NTSC signals,
press OK and select between
NTSC 3.58 and NTSC 4.43.
Source
Mode
Recording AUTO → PAL → MESECAM
PAL/
MESECAM
Playback AUTO → PAL → MESECAM
Recording NTSC3.58 → NTSC4.43
NTSC
NTSC-PB → NTSC3.58 → NTSC4.43
Playback
4 4
Press 1 and 2 to select the option to change,
then Press OK to change the setting and
press 1 and 2 to select the sub menu.
5 5
Press MENU to remove the menu screen.
A B
C
OSD
System Change
*
To set the colour system
If streaks appear during playback, set colour system
manually to conform to the system that the tape was
recorded in. (Normally set the switch to AUTO.)
If your tape was
Set colour
recorded in
system to
PAL
PAL
NTSC3.58
NTSC3.58
NTSC-PB
NTSC4.43
NTSC4.43
NTSC-PB
MESECAM
MESECAM
If your TV is
MULTI-SYSTEM TV
PAL TV
MULTI-SYSTEM TV
PAL TV
MULTI-SYSTEM TV
13
Advertisement
Table of Contents
