Motorola RAZR User Manual page 44

• Security—Select the type of security you want
Save
and touch :
unique password. Other users can access your
Wi-Fi hotspot only if they enter the correct
password.
Note: Keep it secure. To protect your phone and
hotspot from unauthorised access, it is strongly
recommended that you set up hotspot
WPA2
( is the most secure), including password.
• Broadcast Channel—Select a channel that
minimises potential interference. You may need
to try different channels if your hotspot has been
active for some time.
Save
4 Touch when the settings are complete.
When your Wi-Fi hotspot is active, other Wi-Fi enabled
devices can connect by entering your hotspot's
Security
selecting a type and entering the correct
Wireless password
,
42 Wireless
WEP WPA WPA2
, or . Enter a
Security
Bluetooth™ hands-free devices
Turn Bluetooth power on or off
Find it: Menu
Bluetooth
>
Note: To extend battery life, turn off Bluetooth power
when not in use.
Connect new devices
Note: This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, just turn on the device.
1 Make sure the device you are pairing with is in
discoverable mode.
Note: Refer to the guide that came with the device
SSID
,
for details.
2 Touch Menu
Bluetooth settings
>
3 Touch
power is already on, touch
4 Touch a device to connect.
5 If necessary, touch
0000
(like
is connected, the Bluetooth connected indicator
appears in the status bar.
Settings Wireless & networks
> >
Settings
> >
.
Bluetooth
to turn on and scan. If Bluetooth
Scan for devices
OK
, or enter the device passkey
) to connect to the device. When the device
Wireless & networks
.