Basic Specifi Cations - SATO CG408TT Quick Manual

Basic Specifi cations
Model name CG408DT
Printing method Direct Thermal
Head density 203 dpi
(Resolution) (8-dot/mm)
Printing effective area 300 mm pitch x 104 mm wide
Unprintable area Label
Linerless label
Printing speed 50, 75 or 100 mm/sec
2, 3 or 4 inches/sec (Setting: 2, 3, 4)
* Printing speed differs depending on paper type and usage environment.
Paper type/ Roll paper (Face-out / Face-in winding)
Paper shape Recommended use of paper manufactured or specifi ed by SATO.
Paper thickness 60 to 190μm (0.06 to 0.19 mm)
Label size Label
Continuous type
Cutter type
Dispenser type
Tear-off type
Linerless type (Label without backing paper)
Non-adhesive label
Continuous type
Cutter type
Tear-off type
*Some restrictions may apply to the paper sizes that can be used depending on the
type of paper, usage environment, and application.
8
CG412DT
305 dpi
(12-dot/mm)
Length direction Upper: 1.5mm
(Not including backing paper)
Width direction Left: 1.5mm
(Not including backing paper)
Length direction Upper: 4.0mm
Width direction Left: 1.5mm
Pitch : 7 to 300 mm (Backing paper 10 to 303 mm)
Width : 22 to 107 mm (Backing paper 25 to 110 mm)
Pitch : 22 to 300 mm (Backing paper 25 to 303 mm)
Width : 22 to 107 mm (Backing paper 25 to 110 mm)
Pitch : 22 to 100 mm (Backing paper 25 to 103 mm)
Width : 22 to 107 mm (Backing paper 25 to 110 mm)
Pitch : 22 to 300 mm (Backing paper 25 to 303 mm)
Width : 22 to 107 mm (Backing paper 25 to 110 mm)
Pitch : 22 to 100 mm
Width : 22 to 110 mm
Pitch : 10 to 303 mm
Width : 25 to 110 mm
Pitch : 25 to 303 mm
Width : 25 to 110 mm
Pitch : 25 to 303 mm
Width : 25 to 110 mm
CG408TT CG412TT
Thermal Transfer
(Direct Thermal/Thermal Transfer)
203 dpi 305 dpi
(8-dot/mm) (12-dot/mm)
Lower: 1.5mm
Right: 1.5mm
Lower: 1.5mm
Right: 1.5mm