Connecting To A Pc; Capturing Images Using The Provided Software (Ky-Scsi) - JVC KY-F70B Instructions Manual

7. Connecting to a PC

Capturing images using the provided software (KY-SCSI)

The provided software (KY-SCSI) is an application for capturing images on a PC. Using this
application, the image can be captured using just one SCSI cable while camera operations
(freeze, white balance adjustment, etc.) can also be performed from the PC. Both preview and
capturing can be performed using just one monitor. When connecting the hardware, you will
have to purchase a separate SCSI board and SCSI cable.
AA-P700
AC ADAPTER AA-P700
POWER
ON
OFF
AC adapter
Items to be prepared
Name
SCSI board
50-pin HD SCSI cable (male - male) ———
Image software
MEMO
• As the KY-SCSI utilizes the ASPI manager it will not operate if a SCSI board not compatible with
ASPI is used. (Recommended SCSI board: AHA-2940AU (Adaptec Inc.)
• Connect the camera and SCSI board using a one-to-one connection. Correct operation may be
impeded if connected with other equipment in a daisy chain.
(To use other SCSI equipment at the same time, use a separate SCSI board.)
• Set the SCSI ID to a number other than that of the SCSI board (other than 7).
• Set the monitor output mode to the SXGA mode. (
• For details read the Readme.txt file on the floppy disk.
E66
DC IN
AC
Microscope
adapter
Designation
AHA-2940AU
KY-SCSI software
PC operating system
SCSI port Windows® 95B (OSR2)/98/NT4.0
(Does not work under Windows® 95A.)
KY-F70B
KY-SCSI
SCSI-2 cable
(Within 3 m)
The compatible SCSI board is ADAPTEC AHA-2940AU.
Remark
ADAPTEC Inc.
Within 3 m
Provided with the camera
page 24)
Result of capturing
PC
SCSI
card
Preview window