Advertisement
SPECIFICATIONS
System Specifications
Frequency Range
Frequency Response (–3 dB)
Horizonal Coverage Angle (–6 dB)
90º averaged 2kHz to 10kHz
Vertical Coverage Angle (–6 dB)
40º averaged 2kHz to 10kHz
Directivity Factor; DI (Q)
averaged 2kHz to 10kHz
Maximum SPL @ 1m
Peak Output @ 1m
Crossover Points
Dynamic Range
Phase Response
Input Type
Input Impedance
Input Protection
Thermal Protection
Transducer Specifications
Low-Frequency Transducer
Diameter
Voice Coil Diameter
Power Handling
Mid-Frequency Transducer
Diameter
Voice Coil Diameter
Power Handling
High-Frequency Transducer
Diaphragm Diameter
Voice Coil Diameter
Power Handling
Diaphragm Material
Power Amplifiers
40Hz–20kHz
45Hz–18kHz
10.77 (11.95)
123 dB
126 dB
700Hz, 3000Hz
> 100 dB
±40º from 500Hz to
10kHz
Balanced
differential
Physical Properties
50K ohms
Monitoring and
limiting of
continuous rms
output of the
amplifiers
Input stage
muting,
auto-reset
15" (381mm)
2.5" (63mm)
250 watts rms
Disclaimer
6" (152mm)
2" (50mm)
Since we are always striving to make our
60 watts rms
products better by incorporating new and
improved materials, components, and
1" (25mm)
manufacturing methods, we reserve the right
1" (25mm)
to change these specifications at any time
25 watts rms
without notice.
Mylar
trademarks or registered trademarks of Mackie
Designs Inc.
trademarks or registered trademarks of their
respective holders, and are hereby
acknowledged.
©2000 Mackie Designs Inc.
All Rights Reserved.
Printed in Italy.
Low-Frequency Power Amplifier
Burst Capability 300 watts
Rated THD
< 0.05%
Design
Class G, High
Efficiency/High
Current
Mid and High-Frequency Power Amplifiers
Burst Capability
100 watts
Rated THD
< 0.1%
Design: Integrated Module
Line Input Power
U S
120V, 60Hz
Recommended Amperage Service
8 amps
Europe
230V, 50Hz
Recommended Amperage Service
5 amps
Height
43.9" (1116mm)
Front Width
19.1" (484mm)
Rear Width
13.9"(352mm)
Depth
18.1" (460mm)
Weight 100 lbs. (45.5kg)
Enclosure
18mm thick multi-layered
plywood, top and bottom
high pressure resin injected
"caps"
Enclosure Geometry
Trapezoidal, 10º angle
sides
Mounting Methods
Floor mount
"Mackie" and the "Running Man" figure are
All other brand names mentioned are
5
Hide quick links:
Advertisement
