Others; Connecting The Remote Control Unit - JVC KY-F550 Instruction Manual

6. Others

Connecting the Remote Control Unit

Menu function of the camera can be set using the remote control unit (RM-LP55 AND RM-LP57). (Please
refer to the instruction manual of the remote control unit for details on remote control operations. )
DV
RGB, Y/C, SYNC OUT
LENS VIDEO OUT
POWER
TRGGER DC IN
REMORT
SEE INSTRUCTION MANUAL
[MENU §/∫]
When operating the menu function
of this unit from RM-LP55
● Make sure that the Switch 4 located at the
side of this unit is set to [OFF] (lower side).
● Set the "CAMERA TYPE" setting no. of RM-
LP55 to "3".
Connection
Connect cable of the remote control unit to the
[REMOTE] terminal of this unit.
Operation
1.
Press the [ENTER/SET] and [FAR] buttons at
the same time when turning the [OPERATE]
switch to [ON].
Display on LCD screen will be as shown in the
following diagram.
AUTO IRIS LEVEL
2.
Use the [MENU §/∫] buttons to display the
"CAMERA TYPE" setting screen.
Display on LCD screen will be as shown in the
following diagram.
CAMERA TYPE
E-46
RM-LP55
RM-LP55
REMOTE CONTROL UNIT
FUNC 1 FUNC 2
GAIN SHUTTER IRIS MANU OPERATE
W.PAINT
[FUNC2 §/∫]
ENTER
FUNC 2 /SET
MENU FUNC 1
[ENTER/SET]
SHUTTER
FILE W.BAL GAIN
FOCUS
NEAR FAR
[FAR]
SLOW FAST
ZOOM
ON
Camera Type
1
Setting No.
3.
Use the [FUNC2 §/∫] buttons to set the camera
type setting no. to "3".
4.
Pressing the [ENTER/SET] button returns to the
normal mode of use after "INITIALIZE" is dis-
played.
Caution
● When setting the "SHUTTER" function to "SLOW",
set the "GAIN" function to other than "ALC" and
"ALC+EEI".
● When the function settings of RM-LP55 are as be-
low, even if the [AW] button of this unit is pressed,
"LOW LIGHT ERROR" will be displayed on the
LCD screen and auto white will not be functional.
• When the "SHUTTER" function is "SLOW".
• When the "RANDOM TRIGGER" function is
"ON".
• When auto white shading is being activated
through the camera operation.
● When the "RANDOM TRIGGER" function is set
to "OFF", the camera operates in FREEZE mode.
Notes
● In the case when the menu function of this unit is
identical to the remote control unit, the switch func-
tion of the local remote control will override that of
this unit.
● When connected to RM-LP55, even if the "V.
SCAN" under "SHUTTER" item is set to 1/50.0,
the camera will operate based on 1/50.1.
As such, the image level will change if the "STEP"
mode under "SHUTTER" item is changed from
NORMAL (1/50) to "V. SCAN".