Dubbing; Dubbing To A Vcr - JVC GR-DVL140 Instructions Manual

Digital video camera
Table of Contents

Advertisement

40
EN
Power Switch
To S
S-Video cable
(optional)
"Y/C"/"CVBS"
video out select
switch
* Connect when an S-Video cable is not used.
** When connecting the cables, open this cover.
Connector
cover**
To AV
Audio/Video cable
[mini-plug to RCA plug]
(provided)
To AUDIO, VIDEO*
and
-IN connectors
Cable Adapter
(provided)
If your VCR has a
SCART connector,
use the provided
cable adapter.
VCR
TV

Dubbing To A VCR

1
Following the illustration, connect the camcorder and
the VCR. Also refer to pg. 22 and 23.
2
Set the camcorder's Power Switch to "
pressing down the Lock Button located on the switch,
turn on the VCR's power, and insert the appropriate
cassettes in the camcorder and the VCR.
3
Engage the VCR's AUX and Record-Pause modes.
4
Engage the camcorder's Play mode to find a spot just
before the edit-in point. Once it is reached, press
4/6 on the camcorder.
5
Press 4/6 on the camcorder and engage the VCR's
Record mode.
6
Engage the VCR's Record-Pause mode and press 4/6
on the camcorder.
7
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
NOTES:
As the camcorder starts to play your footage it will
appear on your TV. This will confirm the connections
and the AUX channel for dubbing purposes.
Before you start dubbing, make sure that the indications
do not appear on the connected TV. If they do, they are
being recorded onto the new tape.
Set the video out select switch of the cable adapter as
required:
Y/C
: When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does
not accept Y/C signals and uses an audio/video
cable.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
Menu Screen (
•Time Code
.... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen (
pg. 38).
•Playback Sound Mode, Tape Speed And Tape Running
Displays
.... set "ON SCREEN" to "LCD" or "LCD/TV" in the
Menu Screen (

DUBBING

pg. 38).
pg. 38).
" while

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents