Table of Contents
Advertisement
Camera Control
Select the check box to perform an action for
controlling the camera, and specify the control
method.
Preset
This returns the camera to the specified preset
position.
Tour
This performs the specified camera tour.
Action End Preset
Specify the preset position for when the action
ends.
Pin List
Select the check boxes for the pins to be target for
performing an action to change the pin state.
[I/O Device Action] Tab
Number of Settings
This displays the number of IO devices target for the
action.
[Add Device] Button
This displays a dialog box for adding an IO device as
a target for the action.
IO Device Drop-down Menu
Select the I/O device.
Pin List
Select the check boxes of the pins for which to change
the state.
94
Configuring Action Settings
[System Action] Tab
Screen example: For servers
Send e-mail
Select the check box to send a notification by mail to a
specified mail address.
E-mail Address
Enter an e-mail address.
Attach Camera Image
Select the check box to send a still image as a mail
attachment.
If you select this, specify the camera for recording
the still image.
Each camera
Attach the still images recorded with the camera for
which the event occurred.
For example, when motion detection of camera A
and sensor input of camera B are configured as the
triggers and motion detection occurs for camera A,
the still images recorded with camera A are
attached. When the sensor input of camera B turns
on, the still images recorded with camera B are
attached.
Specified Camera
Record a still image with the specified camera.
Message
Enter the message of the mail. It can be up to 32
characters long.
Change Layout
Select the check box to change the monitor layout.
If you select this, select the monitor layout to display
on monitor 1.
This item is only displayed for a server.
Beep
Select the check box to play a beep tone.
If you select this, select a beep tone type.
This item is only displayed for a server.
Note
Pre-define an action for stopping the beep that is
triggered by a manual or sensor input event.
Advertisement
Table of Contents
