Changing Settings Of Alarm Output Pins Of Barionet; Setting Items Of The [Alarm Out] Tab - Sony NSR Series User'smanual

3
Configure each item on the [Alarm Out] tab, and click
[Apply].
For details on each of the items, refer to "[Alarm Out]
Tab (Camera)" (page 91).
The alarm output settings are changed.
Changing Settings of Alarm Output
Pins of Barionet
Caution
• To use the alarm outputs of Barionet, it is necessary to
connect to Barionet from a Web browser and enable the
alarm output settings in advance.
• Barionet cannot be used via a proxy server.
• Manually perform device registration for Barionet
before configuring the following settings.
• For details, refer to the operating manual for Barionet.
1
Click [Device] at the top of the Configuration window.
The Device Configuration screen appears.
2
Open [IO Device] in the [Device] tree, and click to
select [Barionet].
90
Configuring Alarm Output Settings
3
Configure each item on the [Alarm Out] tab, and click
[Apply].
For details on each of the items, refer to "[Alarm Out]
Tab (IO Device)" (page 90).
The Barionet alarm output settings are changed.

Setting Items of the [Alarm Out] Tab

[Alarm Out] Tab (IO Device)
You can configure the alarm output pins of NSR and
Barionet.
After configuring each item, click [Apply] to save your
settings.
This example describes the screen for configuring alarm
outputs of NSR.
Alarm Output Pin List
This displays a list of alarm output pins configured for the
NSR or Barionet selected in the tree.
Enable
Select the check boxes to enable the pins for the alarm
outputs.
No
This displays the numbers of the alarm output pins.
This item cannot be changed.