Advanced Features - JVC GR-DLS1 Instructions Manual

RECORDING
Displaying The Date And Time During Recording
When the Power Dial is set to " ", "5S" or " ", you can choose whether to display the date and time
during recording or not. You must first set the date and time (see "Date/Time Settings"
"DISPLAY" to "ON" in the Date/Time Menu. The Date/Time is always displayed when the Power Dial is set
to " ".
Power Dial
Lock button
1 SELECT OPERATION MODE
First turn the Power Dial to " " while pressing
down the lock button located on the dial,
make sure the LCD monitor is open fully or the
viewfinder is pulled out.
2
ACCESS RECORDING MENU
Press MENU. The Recording Menu appears.
3
ACCESS DATE/TIME MENU
Move the pointer and highlight bar to "TO
DATE/TIME MENU" by rotating the Select Dial.
Press it and the Date/Time Menu appears.
4
SELECT FUNCTION
Move the pointer and highlight bar to
"DISPLAY" by rotating the Select Dial, then
press it. The pointer stops blinking, indicating
that the function has been selected.
5 SET FUNCTION PARAMETERS
Cycle through the available settings of the
selected functions by rotating the Select Dial
and stop when the one you want is displayed.
Then press it and the pointer and highlight bar
automatically move to "RETURN".

Advanced Features

MENU button/
ON/OFF button
Select Dial
6 CLOSE RECORDING MENU
Press the Select Dial twice. Selection is
complete and the menu disappears.
NOTES:
Connect the camcorder to a TV and set "ON
SCREEN" to "ON" in the Date/Time Menu. The
display appears on the connected TV .
The Indicator/Display function overrides these
settings. Even if you have set "ON SCREEN" to
"ON", pressing the ON/OFF button for longer
than 1 second removes the indications from the
screen. Pressing it for longer than 1 second again
makes the indications re-appear.
EN
pg. 13). Set
Display
REC MODE SP
WIDE MODE OFF
ZOOM 40X
DIS OFF
GAIN UP AGC
TO DATE / TIME MENU
4
TO SYSTEM MENU
END
Recording Menu
ON SCREEN OFF
DISPLAY ON
DATE / TIME DEC 25 ' 98
PM 5 : 30
4 RETURN
Date/Time Menu
27