Connecting An External Power Supply - LXE MX9 User Manual

Hide thumbs Also See for MX9:

Table of Contents

Connecting an External Power Supply

To apply external power to the MX9 follow the steps below in sequence.

1. Plug the 3 prong AC adapter cable end of the external power assembly into an AC power source (e.g. wall outlet).

2. Firmly press the female end of the power cable into the male connector on the power adapter. When AC power is being

supplied to the power adapter, the LED on the power adapter illuminates green.

3. Squeeze the catches of the I/O connector and push the cable connector into the MX9 I/O port until it clicks. The click

means the connector is seated firmly.

4. Press the power cable connector pin from the power adapter into the connector on the (USB/Power or Serial/Power)

cable attached to the base of the MX9. External power is now being supplied to the MX9.

Whenever possible, use the AC power adapter with the MX9 to conserve the main battery power

E-EQ-MX9OGWW-D [ 21 ] MX9 User Guide

1. Connects to AC single-pin cable end

2. AC receptacle

3. Wall plug

4. AC connection from wall to adapter

Table of Contents