Service Mode - Canon PIXMA MP150 Service Manual

Printer
Hide thumbs Also See for PIXMA MP150:
Table of Contents

Advertisement

4. REPAIR
4.1 Notes on Service Part Replacement (and Disassembling/Reassembling) in Asia
Service part
Logic board ass'y
(QM2-3163)
Operation panel unit
(QM2-2788)
Absorber kit
(QY5-0149)
Platen ink absorber
(QC1-6014)

4.2 SERVICE MODE

Item
Service test print
- Model name
- Rom version
- USB serial number
- Waste ink amount
EEPROM reset
Waste ink counter reset
Destination setting
Button / LCD checking
Notes on replacement
- Detach the logic board
ass'y about one minute
after removing the
power cord to prevent
the logic board ass'y
from being damaged.
(to discharge the
accumulated electricity
in the capacitor)
- If a waste ink amount is
more than 7%,
replacement of the ink
absorber is necessary.
Timing
At printer operation
checking or parts
replacement
At Logic board replacement
At waste ink absorber
replacement
At Logic board replacement
At Operation panel
operation checking
(such as Operation panel
unit replacement)
Adjustment/settings
After replacement:
1. Initialize the
EEPROM.
2. Reset the waste ink
counter.
3. Set the destination in
the EEPROM.
See 4.2 SERVICE
MODE.
4. Perform the print
head alignment in
the user mode.
After replacement:
1. Check the buttons /
the LCD
See 4.2 SERVICE
MODE.
After replacement:
1. Reset the waste ink
counter.
See 4.2 SERVICE
MODE.
Objective
Operation checking
Reset except for the
followings.
- USB serial number
- Destination setting
- Waste ink counter
Waste ink counter reset
Destination setting
Button / LCD operation
checking
(10/24)
Operation check
- EEPROM print
- Service test print
- Printing via an
USB connection
- Camera Direct
print
- Service test print
Remarks
See Service mode
operation procedures.
Load A4, LTR, or more
large sized paper.
Print sample: See
APPENDIX 1: SHIPMENT
INSPECTION PATTERN 1.
See Service mode
operation procedures.
See the waste ink counter
reset procedures.
(For Asia only)
See Service mode
operation procedures &
Destination setting
procedures.
(For Asia only)
See Button / LCD checking
operation procedures.
(For Asia only)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents