HTC Touch PRO Quick Start Manual page 7

Touch pro
Hide thumbs Also See for Touch PRO:
Table of Contents

Advertisement

you store the device in a protective case and only use the device
stylus or your finger when interacting with the touch screen.
Cracked display screens due to improper handling are not
covered by the warranty.
Device getting warm after prolonged use
When using your device for prolonged periods of time, such
as when you're talking on the phone, charging the battery or
browsing the web, the device may become warm. In most cases,
this condition is normal and therefore should not be interpreted
as a problem with the device.
Heed service markings
Except as explained elsewhere in the Operating or Service
documentation, do not service any product yourself. Service
needed on components inside the device should be done by an
authorised service technician or provider.
Protect your phone
Always treat your phone and its accessories with care and
keep them in a clean and dust-free place.
Do not expose your phone or its accessories to open flames
or lit tobacco products.
Do not drop, throw or try to bend your phone or its accessories.
Do not expose your phone or its accessories to liquid,
moisture or high humidity.
Do not paint your phone or its accessories.
Do not use harsh chemicals, cleaning solvents, or aerosols to
clean the device or its sccessories.
Do not attempt to disassemble your phone or its accessories,
only authorised personnel must do so.
Do not expose your phone or its accessories to extreme
temperatures, minimum –20 and maximum 55 degrees Celsius.
Please check local regulations for disposal of electronic
products.
Do not carry your phone in your back pocket as it could
break when you sit down.
Damage requiring service
Unplug the product from the electrical outlet and refer servicing
to an authorised service technician or provider under the
following conditions:
Liquid has been spilled or an object has fallen onto the
product.
The product has been exposed to rain or water.
The product has been dropped or damaged.
There are noticeable signs of overheating.
The product does not operate normally when you follow the
operating instructions.
Avoid hot areas
The product should be placed away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
Avoid wet areas
Never use the product in a wet location.
Avoid using your device after a dramatic change in
temperature
When you move your device between environments with very
different temperature and/or humidity ranges, condensation
may form on or within the device. To avoid damaging the device,
allow sufficient time for the moisture to evaporate before using
the device.
NOTICE: When taking the device from low-temperature
conditions into a warmer environment or from high-
temperature conditions into a cooler environment,
allow the device to acclimate to room temperature
before turning on power.
Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other
openings in the product. Slots and openings are provided for
ventilation. These openings must not be blocked or covered.
Air Bags
Do not place a phone in the area over an air bag or in the air
bag deployment area. Store the phone safely before driving
your vehicle.
Mounting accessories
Do not use the product on an unstable table, cart, stand,
tripod, or bracket. Any mounting of the product should follow
the manufacturer's instructions, and should use a mounting
accessory recommended by the manufacturer.
Avoid unstable mounting
Do not place the product with an unstable base.

Advertisement

Table of Contents
loading

Table of Contents