JVC GR-D63 Instructions Manual page 26

MENUS FOR DETAILED ADJUSTMENT
26
EN
TELE MACRO
[OFF]: Disables the function.
ON: Usually the distance to a subject where the lens is in
focus depends on the zoom magnification. Unless there
is a distance more than 1 m to the subject, the lens is out
of focus at the maximum telephoto setting. When set to
"ON", you can shoot a subject as large as possible at a
distance of approx. 60 cm.
NOTE:
Depending on the zoom position, the lens may go out of
focus.
WIDE MODE
[OFF]: Records with no change in the screen ratio. For
playback on a TV with a normal screen ratio.
CINEMA* : Inserts black bands at the top and bottom
of the screen. The indicator appears. During playback
on wide-screen TVs, the black bands at the top and
bottom of the screen are cut and the screen ratio
becomes 16:9. When using this mode, refer to your wide-
screen TV's instruction manual. During playback/
recording on 4:3 TVs/LCD monitor/viewfinder, black
bands are inserted at the top and bottom of the screen
and the image appears like a letter boxed 16:9 movie.
SQUEEZE* : For playback on TVs with an aspect ratio
of 16:9. Naturally expands the image to fit the screen
without distortion. The
this mode, refer to your wide-screen TV's instruction
manual. During playback/recording on 4:3 TVs/LCD
monitor/viewfinder, the image is elongated vertically.
* Available only when the VIDEO/MEMORY Switch is set to
"VIDEO".
WIND CUT
[OFF]: Disengages the function.
ON : Helps cut down on noise created by wind. The
" " indicator appears. The quality of the sound will
change. This is normal.
The "s" functions which are set when the Power Switch
is set to "M" are also applied when the Power Switch is
set to "PLAY".
[ ] = Factory-preset
BEEP
OFF: Turns off sounds when performing any operations.
It also deactivates the shutter sound effect, however the
shutter sound is recorded onto the tape during Snapshot
for Video Recording (
BEEP: The beep sounds when the power is turned on or
off, and at the beginning and end of recording. It also
activates the shutter sound effect. (
[MELODY]: Instead of a beep, a melody sounds when
any operation is performed. It also activates the shutter
sound effect. ( pg. 18, 31)
REMOTE
OFF: Disables the remote control operations.
[ON]: Enables the remote control operations.
indicator appears. When using
SYSTEM
pg. 31).
pg. 18, 31)
DEMO MODE
OFF: Automatic demonstration will not take place.
[ON]: Demonstrates certain functions such as Program
AE with special effects, etc., and can be used to confirm
how these functions operate. Demonstration starts in the
following cases:
When the Menu Screen is closed after "DEMO MODE" is
turned "ON".
With "DEMO MODE" set to "ON", if there is no operation for
about 3 minutes after the Power Switch is set to "A" or "M".
Performing any operation during the demonstration stops
the demonstration temporarily. If no operation is
performed for more than 3 minutes after that, the
demonstration will resume.
NOTES:
If a cassette is in the camcorder, the demonstration cannot
be turned on.
"DEMO MODE" remains "ON" even if the camcorder power
is turned off.
If "DEMO MODE" remains "ON", some functions will not be
available. After viewing demo, set to "OFF".
PRIORITY
[LCD]: The image is displayed on the LCD monitor when
the viewfinder is pulled out while the LCD monitor is
opened.
FINDER: The image is displayed in the viewfinder when
the viewfinder is pulled out while the LCD monitor is
opened.
CAM RESET
EXECUTE: Resets all settings to the factory-preset.
RETURN: Does not reset all settings to the factory-
preset.