4. Select Run from the Start menu.
5. Select D:\Driver\English\Setup.exe
from the Open drop-down list, then
click on OK.
• If your CD-ROM drive is not the D drive,
replace the D with the appropriate
designation for your CD-ROM drive.
6. Click on Next.
7. After reading the agreement, click on
Yes.
• If you do not agree to the conditions stated
in the End-User License Agreement, click
on No and the software will not be
installed.
8. Click on Browse to select another
destination directory...
• An install directory and path can also be
entered directly into the install path list
box.
then click on Next.
INSTALLING THE SOFTWARE – WINDOWS
The Software License Agreement will appear.
The Choose Destination Location dialog box will appear.
The Run dialog box will appear.
The installer flash will appear.
Dimâge Scan Dual II
17