MerCruiser GM4 Service Manual page 341

3. Thread large fitting into control valve. Position
hose properly (as prior to removal).
Earlier Style Control Valve: Torque large fitting to
20-25 lb. ft. (27-34 N·m).
a - Large Fitting
Later Style Control Valve: Torque fittings to 23 lb. ft.
(31 N·m)
4. Route hose along flywheel housing and secure
with J-clamp(s) provided.
Index
90-816462 2-695
a
72026
73786
5. Using hose clamp, install hose on fluid cooler.
Tighten clamp securely.
a - Fluid Cooler
b - Hose Clamp
c - Hose
6. Fill and air bleed system. Refer to Section 1B -
"Maintenance" (see "Table of Contents").
a
b
c
73579
POWER STEERING - 7A-9