Playback Menus - JVC GR GR-DV4000 Instructions Manual

40
EN
Video Menu
VIDEO
Playback sound
During tape playback, the camcorder detects the
sound mode in which the recording was made, and
plays the sound back. Select the type of sound to
accompany your playback picture. According to the
menu access explanation on page 31, select
"SOUND MODE" or "12bit MODE" from the Menu
Screen and set it to the desired parameter.
SOUND MODE
STEREO : Sound is output on both "L" and "R"
channels in stereo.
SOUND L : Sound from the "L" channel is
output.
SOUND R : Sound from the "R" channel is
output.
12bit MODE
MIX: Original and dubbed sounds are combined
and output in stereo on both "L" and "R"
channels.
SOUND 1: Original sound is output on both "L"
and "R" channels in stereo.
SOUND 2: Dubbed sound is output on both "L"
and "R" channels in stereo.
NOTES:
The "SOUND MODE" setting is available for both
12-bit and 16-bit sound. (In previous models'
functions, "12-bit" is called "32 kHz" and "16-bit"
is called "48 kHz".)
The camcorder cannot detect the sound mode in
which the recording was made during fast-forward
or rewind. During playback the sound mode is
displayed in the upper left corner.
(Factory-preset: STEREO
(Factory-preset: SOUND 1)
Synchro adjustment
For details, refer to "For More Accurate Editing"
( pg. 64).
SYNCHRO
Recording mode
Allows you to set the video recording mode (SP or
LP) depending on your preference. It is
recommended you use "REC MODE" in VIDEO
Menu when using this camcorder as a recorder
during dubbing. (
REC MODE
SP / LP
)
NOTE:
"REC MODE" can be set when the Power Switch is
set to "PLAY" or "M".
Dubbing from tape to memory card
COPY
OFF: Enables snapshots to be taken during tape
playback.
ON: Enables dubbing of images recorded on a
tape to a memory card. (
Deleting thumbnail images
For details, refer to "To delete thumbnail images"
( pg. 49).
NAVI.DEL.
IMAGE SEL. / TAPE SEL. / ALL / RETURN
S-Video/AV input
S/AV INPUT
OFF: Enables audio/video signal output to a TV,
VCR, etc. via the AV and S-Video connectors.
( pg. 22, 52)
ON: Enables audio/video signal input from the AV
and S-Video connectors. (

PLAYBACK MENUS

(Factory-preset: ±0.0)
pg. 52, 54)
(Factory-preset: SP)
(Factory-preset: OFF)
pg. 55)
(Factory-preset: OFF)
pg. 52)