JVC GR-AX937 Instructions Manual page 26

26
EN
SELECT
PROGRAM AE select dial
SET
Date display Time display
Date-off mode
(No indication)
The characters you have set using Character
Generator
Date display
DEC 25.97
Time display
PM10:50:00
Date/Time display
DEC 25.97 PM10:50:00
RECORDING
Disp.
Date/Time display
Auto Date Record
mode
Auto Date Record mode
Auto Date
Auto date record mode
DEC 25.97
Auto date record
executed
Characters
I LIKE YOU
Example of stored
characters
Advanced Features (cont.)
Date/Time Character Insert
This feature allows you to display date, time and characters
in your viewfinder and on a connected color monitor,
record them manually or automatically, and even make
your own titles.
NOTE:
You should already have performed the Date/Time
Setting procedure (
before continuing.
DISPLAY
SELECT MODE
1
Turn the PROGRAM AE select dial to any position
except AUTO LOCK.
SELECT DISPLAY
2
Press SELECT repeatedly until "
CHOOSE DISPLAY MODE
3
Press SET while in Record–Standby to cycle through
the modes as shown in the illustration at left.
NOTES:
The selected display can be recorded.
If you don't want to record the display, select Date-off
mode before shooting.
If you want to delete the display during shooting,
engage the Recorde-Standby mode, press SELECT
repeatedly until "
Disp.
select the Date-off mode.
AUTO DATE RECORD
Your camcorder automatically records the date for about
5 seconds after recording is initiated in the following
situations:
•After changing the date.
•After loading a cassette.
•After Auto Date Record mode is selected by pressing
SET.
In this mode, the date is replaced after 5 seconds with
"Auto Date".
NOTES:
Setting PROGRAM AE to LOCK always engages the
Auto Date Record mode, and disables all other modes.
In the Auto Date Record mode, if the date changes
while you're shooting, the date indication is recorded
for about 5 seconds from that point. It is not recorded
during any other recordings made on that day.
pg. 11). If you haven't, do so
" appears.
Disp.
" appears then press SET and