Basic Osd Menu - Without Input Signals Connected - BenQ HT1075 User Manual

Basic OSD menu - without input signals connected

As there's no input signal to your projector, only the submenus of Settings under Basic OSD menu -
with input signals connected are available. Menu options that are not available will become grayed out.
To access the OSD menu, press MENU on the projector or remote control.
• Use the arrow keys (
items.
• Use OK to confirm the selected menu item.
To switch from the Basic OSD menu to the Advanced OSD menu, see page 30.
Menu
Language
Projector
Position
Test Pattern
Auto Source
Menu Type
HDMI Format
Reset Lamp
Timer
Reset All
Settings
Information
34 Menu Functions
/ / / ) on the projector or remote control to move through the menu
Sets the language for the On-Screen Display (OSD) menus.
The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. See Choosing a location
Enables this function to display the grid test pattern, which helps you adjust the image
size and focus so as to check if the projected image is free of distortion.
Sets whether the projector searches automatically for input sources. Select On to
enable the projector to scan for input sources until it acquires a signal. If the function
is set to Off, the projector selects the last used input source.
Switches to the Advanced OSD menu.
Selects an input source type for the HDMI signal. You can also manually select the
source type. The different source types carry different standards for the brightness
level.
HDMI Format is only available when the HDMI signal is selected.
Activates this function only after a new lamp is installed. When you select Reset, a
"Reset Successfully" message displays to notify that the lamp time has been reset to
"0".
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Language, Projector Position,
and Reset Lamp Timer.
Displays the following information about your projector.
• Source: Displays the current signal source.
• Picture Mode: Displays the current Picture Mode.
Resolution: Displays the native resolution of the input source.
•
• Color System: Displays input system format.
• Equivalent Lamp Hour: Displays the number of hours the lamp has been
used.
• 3D Format: Displays the current 3D mode.
3D Format is only available when 3D Mode is enabled.
Firmware Version: Displays the firmware version of your projector.
•
Some information is given only when certain input sources are in use.
Submenus and Descriptions
for details.