Table of Contents
Advertisement
III. INSTALLATION
12. Wake-on-LAN Connector (3-pin WOL_CON)
The WOL_CON connector powers up the system when a wakeup packet or
signal is received from the network through the ASUS PCI-L101 LAN card (see
section VII. ASUS LAN Card).
IMPORTANT: This feature requires that the WAKE On LAN Power Up Con-
trol is set to Enabled (see "Power Management Setup" under IV. BIOS SOFT-
WARE) and that your system has an ATX power supply with at least 720mA
+5V standby power.
+5 Volt Standby
Ground
(No Connection)
P2B Wake on LAN Connector
ASUS P2B User's Manual
31
Advertisement
Table of Contents
