Using A Loop System - Siemens miniTek User Manual

Using a loop system

Using a loop system
Your miniTek is equipped with a telecoil. This is intended
for using induction loops, e. g. in churches, theaters or in
a lecture room.
Press

on.
Press to change to the loop receiver (refer to table

"Changing the audio source" in chapter "Basic func-
tions").
You can now hear the sound from the loop system
through your hearing instruments.
The hearing instruments will switch automatically to
the telephone program when your phone rings and will
change back to the loop system after hanging up the
phone.
26
for about 3 seconds to turn the miniTek