Technical Specifications; Power Supply Specifications; Networking Standards Supported - RuggedCom MediaConverter Installation Manual

Technical Specifications

3 Technical Specifications

3.1 Power Supply Specifications

Power Supply Type
24 VDC
48 VDC
HI (88/300 VDC)
1
HI (120/240 VAC)
1
Notes: 1 – This is the same power supply for both AC and DC.
2 – (T) Denotes time-delay fuse

3.2 Networking Standards Supported

Parameter
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
TIA/EIA 785
All RuggedMC products feature Link Pass Through support. When loss of link is detected on
TM
either the fiber side or the copper side, link pulses are no longer transmitted on any of the
RuggedMC ports. This feature allows for prompt loss of link detection and user correction. The
TM
faulty link partner can be identified by loss of link on the RuggedMC
RuggedCom
®
Minimum Maximum
Input Input
18 VDC 36 VDC
36 VDC 72 VDC
88 VDC 300 VDC
85 VAC 264 VAC
10FL
Module Module



14
Internal Maximum Power
Fuse
Rating
3.15A(T)
2
3.15A(T)
2
3.15A(T)
2
100FX
10BaseT
100BaseTX / 100BaseFX

 Full Duplex Operation
10/100BaseSX Capable
front panel indicators.
TM
RuggedMC™ RMC Installation Guide rev105
Consumption
3 W
Notes