JVC HV-36P38SUE, HV-32P37SUE, HV-28P37SUE Instructions Manual page 9

Setting up your TV
6 Press the a
T-V LINK menu
T-V LINK
DOWNLOAD TV
OK
D0005-EN
If you do not have a T-V LINK
compatible VCR connected:
Press the b button to exit the T-V LINK
menu.
The T-V LINK menu disappears.
If you have a T-V LINK compatible
VCR connected to the EXT-2
terminal:
Follow the operating procedure
"Downloading the data to VCR" on
page 9 to transmit the Programme number
(PR) data.
Now, the initial settings are complete,
and you can watch the TV
• When your TV can detect the TV channel
name from the TV channel broadcast
signal, it automatically registers the TV
channel name (ID) to the Programme
number (PR) in which the TV channel has
been registered.
• If a TV channel you want to view is not
set to a Programme number (PR),
manually set it using the MANUAL
function. For details, see "EDIT/
MANUAL" on page 32.
• The TV channel is not registered in
Programme number PR 0 (AV). When
you want to register a TV channel to PR 0
(AV), manually set it using the
MANUAL function. For details, see
"EDIT/MANUAL" on page 32.
8
a button to display the a a
VCR
EXIT
ACI function
This TV has an ACI function which decodes
the ACI (Automatic Channel Installation)
data.
Using the ACI function allows all TV
channels transmitted from the cable TV
station to be properly registered quickly
according to the data from the cable TV
station.
If "ACI START/ACI SKIP" appears in
the AUTO PROGRAM menu:
You can use the ACI (Automatic Channel
Installation) function to decode the ACI data
and complete the registration of all the TV
channels in a short period of time.
Press the 6 6 buttons to choose ACI
6 6
START. Then press the a
start the ACI function
Depending on your cable TV station, there
may be a broadcast selection menu set up by
the cable TV station.
Follow the menu indications and use the
5 and 6 buttons to operate the menu.
After you have made the setting, press the
a button.
• If you have any questions about the items
in the Broadcast Selection menu or how to
operate the menu, please contact your
cable TV station.
• If you don't want to use the ACI function,
press the 6 buttons to choose ACI
SKIP and then press a.
• When the cable TV broadcast reception is
poor, the ACI function will not work
properly.
• If there is an error in the ACI data itself,
the TV channel cannot be registered
properly. If this happens, turn the ACI
function off (ACI SKIP) and use the
AUTO PROGRAM function.
Alternatively, use the EDIT/MANUAL
function to correct the Programme
number (PR) setting.
a button to a a