Note: Charges may apply for certain types of received calls, such as
roaming and high speed data calls. Contact your GSM network operator for more
information.
Note: The phone expects the callback call to use the same data call settings
that were used in the callback-requesting call. The network must support that
type of call in both directions, to and from the phone.
•
Callback type
- The options are
provider for the correct setting to use; it will depend on the service provider's
configuration.
•
Callback number
- Key in your phone's data phone number which the dial back
server uses. Usually, this number is the data call phone number of your phone.
•
Use PPP compression
if supported by the remote PPP server. If you have problems with establishing a
connection, try setting this to No. Contact your service provider for guidance.
•
Use login script
- The options are
•
Login script
- Insert the login script.
•
Modem initialisation
modem AT commands. If required, enter characters specified by your service
provider or Internet service provider.
GPRS
Go to Settings→ Connection→ GPRS.
The GPRS settings affect all access points using a packet data connection.
Use server no.
- When set to Yes, this option speeds up the data transfer,
Yes
/ No.
(Modem initialisation string)- Controls your phone using
©
Copyright
2004 Nokia. All rights reserved.
/
Use other
no.. Ask your service
113