Tuning Channels (Automatic Channel Programming) - Panasonic TC-15LT1 Operating Instructions Manual

Tuning channels
Automatically scans all TV channels and stores them in memory.
1
Turn the Power on and press the TV/VIDEO button to display the TV channel.
2
Press the MENU button to display the MENU screen and select SET UP.
ENTER
3
ENTER
4
ENTER
5
ENTER
6
Press the RETURN button to return to the PROGRAM CHANNELS screen.
7
Press the MENU button to exit the set up menu.
Notes:
•
When buttons are pressed with AUTO PROGRAM running, the TV set will return to normal viewing. (Channels
searched up to this point are added.)
•
After AUTO PROGRAM is finished, the lowest channel number added will be received.
•
When there are no receivable channels, channel 69 is displayed for TV and channel 125 is displayed for cable TV.
16
(Automatic channel programming)
Press to select PROGRAM CH.
Press to display the PROGRAM
CHANNELS screen.
Press to select MODE.
Press to select TV or CABLE.
Press to select AUTO PROGRAM.
Press to display the confirmation screen.
Press to select YES.
Press to select NO.
If YES selection
Press to run AUTO PROGRAM
Channels will automatically advance until all channels have been scanned. Channel numbers with a
video signal present will turn light blue indicating it has been stored in the Channel Scan Memory.
MENU
ADJUST SET UP
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
PROGRAM CHANNELS
TV CABLE
MODE
AUTO PROGRAM
MANUAL PROGRAM
AUTO PROGRAM
Activate
"AUTO PROGRAM?"
YES NO
AUTO PROGRAM
In "AUTO PROGRAM"
59
CHANNEL
MENU
STOP