Tuning Channels; Automatic/Manual Channel Programming - Panasonic TC-14LA2 Operating Instructions Manual

Tuning Channels

1
Press the TV/ VIDEO button to display the TV channel.
2
Press the MENU button to display the MENU screen and select SET UP.
3
Automatic channel programming
Automatically scans and stores all the TV channels.
4
5
Channels will automatically advance until all channels
have been scanned. Channel numbers with video
signal received will be stored in the Channel Memory.
Notes:
• When any button is pressed during AUTO PROGRAM,
the TV will return to the normal viewing. (Channels
searched up to the point are added.)
• After AUTO PROGRAM finishes, the lowest channel
number added will be displayed.
• When there are no receivable channels, channel 69
(for TV) or channel 125 (for cable TV) is displayed.
Press to select PROGRAM CH.
Press to display the PROGRAM
CHANNELS screen.
Press to select MODE.
Press to select TV or CABLE.
Press to select AUTO
PROGRAM.
Press to display the AUTO
PROGRAM screen.
AUTO PROGRAM
Activate
"AUTO PROGRAM?"
YES NO
Press to select YES.
Press to start AUTO
PROGRAM.
AUTO PROGRAM
In "AUTO PROGRAM"
59
CHANNEL
Manual channel programming
Add or delete a channel manually.
4
5
6
• Repeat steps 5 and 6 for other channels.
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
PROGRAM CHANNELS
MODE TV CABLE
AUTO PROGRAM
MANUAL PROGRAM
Press to select MANUAL
PROGRAM.
PROGRAM CHANNELS
TV CABLE
MODE
AUTO PROGRAM
MANUAL PROGRAM
Press to display the MANUAL
PROGRAM screen.
Press to select the channel.
You can also use the
numbered buttons.
MANUAL PROGRAM
ENTER CHANNEL
121
Press to add the channel to
the Channel Memory (the
channel number turns
blue).
Press to delete the channel
from the Channel Memory
(the channel number turns
yellow).
13