Table of Contents
Advertisement
Anchor bracket
Bolt
Spacer
100 mm
(4.0 in.)
TYPE A
On the filler panel behind the rear seat
Center anchor—
a. Using the illustration as a guide, run
your fingers across the trim of the filler
panel itself to locate the position of the
holes underneath.
b. Make a hole in the covering directly
above the hole in the filler panel.
c. Insert a 15 mm (0.6 in.) spacer and
tighten down the anchor bracket for
your child restraint system with a bolt.
Torque
the bolt
to 16.5—24.7 N m
(1.68—2.52 kgf m, 12.2—18.2 ft lbf).
72
Anchor
Bolt
bracket
Spacer
Outside anchors—
a. Remove the cap as shown in the il-
lustration.
b. Insert a 15 mm (0.6 in.) spacer and
tighten down the anchor bracket for
your child restraint system with a bolt.
Torque
the bolt
to 16.5—24.7 N m
(1.68—2.52 kgf m, 12.2—18.2 ft lbf).
'99camry U
Bolt
Anchor bracket
345 mm
Spacer
(13.6 in.)
100 mm
(4.0 in.)
185 mm
(7.3 in.)
TYPE B
On the filler panel behind the rear seat
Center anchor—
a. Using the illustration as a guide, run
your fingers across the trim of the filler
panel itself to locate the position of the
holes underneath.
b. Make a hole in the covering directly
above the hole in the filler panel.
c. Insert a 15 mm (0.6 in.) spacer and
tighten down the anchor bracket for your
child restraint system with a bolt. Torque
the bolt to 16.5—24.7 N m (1.68—2.52
kgf m, 12.2—18.2 ft lbf).
Advertisement
Table of Contents
