Disassembly and Assembly
Disassembling the chassis
1.
Remove the Antenna, Channel Selector knob and Radio On-Off/Volume Control knob.
2.
Unscrew the nuts for the channel selector knob and the volume control knob.
3.
Unscrew the two screws with a screwdriver at the bottom of the radio.
4.
Lift the chassis by 25 degrees and pull it backwards.
5.
Unsolder the speaker cable with an electric iron and remove the chassis.
Disassembling the speaker
1. Unscrew the screw shown in Figure 9, and remove the speaker fixing sheet.
2. Remove the speaker.
Figure 7
Figure 8
81
TC-508 Service Manual
25°