Moultrie D-333 Instructions Manual page 8

i m p r i n t i n F o
?
Y E S
Imprint Info?
Use the Up/Down buttons to choose between:
YES - Camera Name, Time, etc, information will be imprinted at the bottom of the image/video
as an infromation bar)
Note: Remember to input the camera name in the setup and set the clock accordingly.
NO - No information bar will be imprinted.
Press the OK button to confirm the selection. Press the Right button to move to the next screen.
t e m p e r a t u r e
f a h r e n h e i t
Temperature
The temperature is imprinted on each photo and can be in degrees Fahrenheit or Celsius. To change
the temperature units, press the Up/Down
button to save the setting and return to the Camera Setup Menu.
OK
C A M E R A N A M E
M O U L T R I E C A M
Setting Camera Name
Press the OK button. Use the Up/Down and Left/Right buttons to select an identity for your
camera. For example, you can use a name or a location; the identity you wish to use is up to you.
Press the button. Press the button.
OK Right
S E C U R I T Y C O D E
0 0 0 0 0
Security Code
and Left/Right buttons to select a 5 digit security code
Press the OK button. Use the Up/Down
for your camera. Press the OK button. Press the
Note: Please remember your security code. If the code is lost, you can contact Moultrie customer
support to reset the password. (Charges may apply)
u p g r a d e f i r m w a r e
n o
Upgrade Firmware
The firmware version is displayed. Press
Up/Down
YES - To upgrade firmware.
NO - Keep current firmware.
Make sure that a SD card with the new firmware is inserted into the camera. Press the
make selection. Make sure the process is completed before pressing other buttons or powering the
camera Off. Press button to go back to Setup Selection screen.
Right
Page 8
D-333 Digital Game Camera
buttons to highlight the desired setting. Press the
Right button.
to choose setting.
Setting Time Lapse Features
When you choose Time Lapse the LCD Display will automatically start showing the different features
within Time Lapse. Using the navigation process, set the features to your preference.
T I M E L A P S E
I N T E R V A L
Interval Time Setting
Press the OK button. Use the Up/Down buttons to choose between 10, 30 seconds / 1, 5, 10, 15,
or 30 minutes / 1, 3, 6 hours or 1 day. When your selections have been made, press the Right button.
M U L T I - P R O G R A M
Setting Multi-Program
Press the OK button. Use the Up/Down buttons to choose between 4 available settings:
1 PROGRAM, 2 PROGRAM, 3 PROGRAM or 4 PROGRAM. This indicates the number of cycles
the camera will operate within a 24 hour period. Press the OK button. Press the Right button.
P R O G R A M 1 W A K E U P
Setting Program Wake up
Press the OK button. Use the Up/Down buttons to choose between 24 different settings: any hour
from MlDNlGHT to 11 PM. This will determine what time the camera will wake up during the program
and begin its time lapse program. Press the OK button.
P R O G R A M
Setting Program Sleep
When wakeup time is set, the camera will automatically move to the Sleep option. Set the sleep time
after the wakeup time you already set. This will set the wake up and sleep during the time lapse
photography. Press the OK button. Press the Right button.
NOTE: Repeat the above steps for each Program to be set.
OK button to
3 0 S E C
2 P R O G R A M
6 A M
1 S L E E P
9 A M
D-333 Digital Game Camera
Page 9