Pre-Installation For Installing The Vitodens 200-W Directly Onto A Wall; Pre-Installation, Multi-Boiler System - Viessmann VITODENS 200-W Technical Manual

Design information

Pre-installation for installing the Vitodens 200-W directly onto a wall

An installation template is supplied with the Vitodens 200-W for the
location of fixing holes for the wall mounting bracket and the location
of the flue pipe on the wall.
Order connection sets separately for the connection of the heating cir-
cuits and one DHW cylinder.
4
A Reference point Vitodens top edge
B Installation template Vitodens
C Area for power supply cables.
Allow all cables/leads to protrude approx. 1200 mm from the
wall.
Installation in front of a wall with a self-supporting mounting
frame (single boiler)
The Vitodens can be mounted on the self-supporting mounting
frame.

Pre-installation, multi-boiler system

Hydraulic cascade for wall mounting and installation on self-sup-
porting frames
Flow and return collectors with low loss header for multi-boiler systems
of 2 to 4 Vitodens boilers in series or 4 boilers arranged as a block.
Heating circuit connections either on the right or left.
VIESMANN
28
(cont.)
4 8
0
4 2
2
Ø 10
E
C B
2 0
0
A
F
D Recommended dimension
■ Single boiler system: 1975 mm
■ Multi-boiler system: 1700 mm
E Wall mounting bracket
F Top edge finished floor
The panel supplied with the boiler cannot then be used.
VITODENS 200-W