How To Use - HoMedics Tanda Zap Instructions For Use Manual

• Do not operate this device in an environment where
other devices that intentionally radiate electromagnetic
energy in an unshielded manner are being used. Portable
or mobile radio frequency communication equipment
can affect medical electrical equipment.

How to use

Please note some people are sensitive to light. If you think
you may be sensitive to light, you should not use the Zap
device without doing a light sensitivity test first. Refer to
light sensitivity test described on page 3.
Steps:
1.
Press the orange power button.
2.
The device will vibrate and the bacteria killing blue light
will illuminate. Do not stare directly into the beam of light.
3.
Lightly place and hold the Zap device over your blemish
for 2 minutes. When the vibration stops, the treatment
cycle is complete.
4.
Repeat 2 to 3 times daily.
TandaZapEN-1011-01.indd 7
homedics.co.uk
7
26/10/2011 08:5