Basic Operation - JVC AV-21L11, AV-21L31, AV-25L31, AV-29L31, AV-21L31B, AV-25L31B, AV-29L31B Instructions Manual

Basic operation

• The illustration below is for the remote control
RM-C248 supplied with L31 series models. Your
remote control may not look exactly like the
illustrations.
DISPLAY
MENU
CHANNEL
CLOSED
CAPTION
1
TV/VIDEO
4
7
PICTURE MODE
CHANNEL SCAN RETURN
ECO SENSOR
RM-C248 REMOTE CONTROL UNIT
POWER
VOLUME
MUTING
2 3
5 6
8 9
0
100
OFF TIMER
1 Press the POWER button to turn
your TV on.
• If your TV does not turn on, press the Main
power button on the TV then press the
POWER button again.
• You can also turn on your TV by pressing
any of the following buttons;
- the CHANNEL m button
- the TV/VIDEO button
2 Select a channel.
I Press the CHANNEL m button.
• Up/down selection cannot be selected for
channels to which the CHANNEL SKIP
function has been set to skip on. See page
14.
I Press the Number buttons to enter
the channel number.
• When you want to select a channel num-
ber over 100, enter the two-digit number
after pressing the 100+ button.
3 Press the VOLUME M button to
adjust the sound.
4 To turn your TV off, press the
POWER button.
• We recommend that you press the Main
power button on the TV to turn the main
power off if you do not plan to use your TV
for a long time or if you wish to save energy.
Viewing Images from an External
Device:
Press the TV/VIDEO button to select the
VIDEO mode.
• You can also use the INPUT function to select
the VIDEO mode. For details, refer to page 11.
7