Mounting The Timer; Specifications; Limited Warranty - Radio Shack 61-267 User Manual

Mounting the Timer

Use a screw (not included) to mount the
timer on the wall. Let the screw head
extend ¼ in. (6 mm) from the wall.

Specifications

Input . ............................................... 125V AC, 60Hz
Output ..............................15 A, Resistive/General
1250 W (10 A) Tungsten
1/2 HP
Minimum Interval . .......................................15 min.
Dimensions (H×W×D) ................ 5.5 × 4.1 × 2.4 in
(140 × 105 × 60 mm)
Specifications are subject to change and improvement without
notice. Actual product may vary from the images found in this
document.

Limited Warranty

RadioShack warrants this product against defects in materials
and workmanship under normal use by the original purchaser for
ninety (90) days after the date of purchase from a RadioShack-
owned store or an authorized RadioShack franchisee or dealer.
RADIOSHACK MAKES NO OTHER EXPRESS WARRANTIES.
This warranty does not cover: (a) damage or failure caused by
or attributable to abuse, misuse, failure to follow instructions,
6